You are reading a single comment by @pifko and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@pifko
a 102mm BB should do it - You might also want 10mm worth of spacers for the rear hub. With these spacers, you can then put, say, 6mm on the non-drive side, and 4mm on the drive side, bringing the sprocket more in line with the desired chainline.
Or remove the chainring and chainring bolts from the Lasco chainset and mount it on the Sakae crank.