I don't get it, with BB centred in frame left crank is too far out and right crank is catching frame. Literally must be about 1 - 1.5mm across. Think it may require an offset BB.
Tried all of above. apart from shelling out another £40 for a wider BB.
i will stick with the spacing it out a lil bit as the cheapest and most straightforward way to solve, if it still develops a creak after putting in a spacer and using loctite on the threads then I may look at another bb, but I reckon this will fix it good! (:
I don't get it, with BB centred in frame left crank is too far out and right crank is catching frame. Literally must be about 1 - 1.5mm across. Think it may require an offset BB.
Tried all of above. apart from shelling out another £40 for a wider BB.
i will stick with the spacing it out a lil bit as the cheapest and most straightforward way to solve, if it still develops a creak after putting in a spacer and using loctite on the threads then I may look at another bb, but I reckon this will fix it good! (: