First up the Plum Vainqueur Columbus Track Frame 58cm
Specification and measurements:
Top tube: 58 cm - cc
Seat tube: 60 cm - cc
Tubing: Columbus
Drop outs: Campagnolo
BB Threading: Italian
Spacing: 100 / 120”
Campagnolo Seat Bolt
Tange Falcon Headset
Beautiful lugwork and a very nice chromed Cinelli fork crown with the P for plum.
Hate to get rid but the cash flow is tight.
There is one problem. There is currently a stuck seat post, which has been cut down and filed down to the shape of the seat tube. It now takes a 22.2 seat post but I feel that if any of you have got the patience there would be a possibility of getting it out some way. More pictures can be found in the link that I post at the bottom.
I'm looking for £200 for the frame but I'm open to offers.
Next up wheelset. Rigida SX100 Black Rims, Front laced radial to Miche low flange hub with quick release. Rear laced up to Suzue high flange hub with 17 tooth Euro Asia Cog with lockring. Included with Vredestein Ricorso tan walled tyres with Inner Tubes
Price £110
Miche Crankset with 49 tooth ring fairly used but still in good condition
price £70
3ttt 90mm Stem few light scratches £15
Thomson stem 70mm / 25.4 clamp
Hardly used with bag etc
Price £35
Nitto Bars Aluminium Drops B123AA
Had these on for a few months. Two slight scratches on the left hand side which are shown in the other pictures. This was done before I had tape on.
All in all good condition.
Price £50
First up the Plum Vainqueur Columbus Track Frame 58cm
Specification and measurements:
Top tube: 58 cm - cc
Seat tube: 60 cm - cc
Tubing: Columbus
Drop outs: Campagnolo
BB Threading: Italian
Spacing: 100 / 120”
Campagnolo Seat Bolt
Tange Falcon Headset
Beautiful lugwork and a very nice chromed Cinelli fork crown with the P for plum.
Hate to get rid but the cash flow is tight.
There is one problem. There is currently a stuck seat post, which has been cut down and filed down to the shape of the seat tube. It now takes a 22.2 seat post but I feel that if any of you have got the patience there would be a possibility of getting it out some way. More pictures can be found in the link that I post at the bottom.
I'm looking for £200 for the frame but I'm open to offers.
Next up wheelset. Rigida SX100 Black Rims, Front laced radial to Miche low flange hub with quick release. Rear laced up to Suzue high flange hub with 17 tooth Euro Asia Cog with lockring. Included with Vredestein Ricorso tan walled tyres with Inner Tubes
Price £110
Miche Crankset with 49 tooth ring fairly used but still in good condition
price £70
3ttt 90mm Stem few light scratches £15
Thomson stem 70mm / 25.4 clamp
Hardly used with bag etc
Price £35
Nitto Bars Aluminium Drops B123AA
Had these on for a few months. Two slight scratches on the left hand side which are shown in the other pictures. This was done before I had tape on.
All in all good condition.
Price £50
All detailed picks are in the photobucket link underneath and any questions about anything just message me.
Thanks
http://s55.photobucket.com/albums/g126/h_itcher/FOR%20SALE/