30 gbp each set - of wheels (for cog, chain and lock ring add 12 gbp)
1st set weinman 700c alloy rims - with 70x25 tyres on (these are the slightly larger rims)
2nd set rigida alloy rims (like today's chrina i'd say) 700x23 tyres on
both set up from random garage stuff - but are paired, will come with 16t cog and BB lockring plus 1/8 gold chain (i'll add in a 1/2 link on each chain for you too)
both pairs are converted road wheels from 80s bikes and have QR front and rear plus freehub & BB lockring build - neither acceptable for track or posing but both good for a runaround / beater conversion. i'll rotrax cog on if you wish (the right way - clean metal on metal and tight)- other sizes of cog available - at a bit more cost for above 16t. chainline on both c. 42/43mm - good for marry up with road crank parred down to SS. on inner ring c. 126 oln rear spacing - will go in any steel frame from 120mm to 130mm no probs at all.
full set up kit - just drop in old road frame and away you go - only specialist tool needed is chain breaker
pick up in manchester or P&P in UK for 15
30 gbp each set - of wheels (for cog, chain and lock ring add 12 gbp)
1st set weinman 700c alloy rims - with 70x25 tyres on (these are the slightly larger rims)
2nd set rigida alloy rims (like today's chrina i'd say) 700x23 tyres on
both set up from random garage stuff - but are paired, will come with 16t cog and BB lockring plus 1/8 gold chain (i'll add in a 1/2 link on each chain for you too)
both pairs are converted road wheels from 80s bikes and have QR front and rear plus freehub & BB lockring build - neither acceptable for track or posing but both good for a runaround / beater conversion. i'll rotrax cog on if you wish (the right way - clean metal on metal and tight)- other sizes of cog available - at a bit more cost for above 16t. chainline on both c. 42/43mm - good for marry up with road crank parred down to SS. on inner ring c. 126 oln rear spacing - will go in any steel frame from 120mm to 130mm no probs at all.
full set up kit - just drop in old road frame and away you go - only specialist tool needed is chain breaker