You are reading a single comment by @mftempleton and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@mftempleton
Hi,
**Calipers: **Four, variously branded dual pivot calipers, unused. I only have two standard bolts for these. But oddly I also have three long (30mm) recessed bolts for use with any of these if you want to put a rear on a front, or have a fat frame. £7.00 for each caliper and your choice of short or long bolt - hoping people want the ones I have! Otherwise we can work it out another way... 2 x shimano, 1 x acor, 1 x Tektro.
**Fork: **I powder coated an old Raleigh road frame then decided to put a new track fork on the mainframe, so this is spare. Built for 27" I doubt you could find a caliper to drop to a 700c, but if you don't run hand brakes... The threading is running for approximately **110-135mm **above the crown so you probably need a **head tube of 100-125mm **if you want to fit this on. Has great lugging and I think was done in RAL2000 - lovely warm orange...£10.00.
Levers: See photo of the calipers, there's a pair of levers in there. I think they're designed for V-brakes, not sure. £5.00.
All in Stoke Newington.
Cheers.
Matt
2 Attachments