You are reading a single comment by @jersey and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@jersey
if the steer tube is lonf enough then it will work, even if clamping fully on threads.
put everything together. mark it. disassemble and cut a few mm below the mark (or above the mark and use a spacer).
that said, you'll need a new headset (at the least, the top part) and a stem.
cheaper to just get it threaded for 50 unless you're going cheap.
the over arcing truth is that the threads don't matter for shit. clamp away.