You are reading a single comment by @broken_777 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@broken_777
ok lets start with miche - CNC'ed body, cracking flange same as goldtec, stoopid miche only l-ring thread, lockring is alloy piece of crap that will seize if ridden in nasty enough weather followed by rounding of all the notches....then lots of work with file/vise/hacksaw to remove it, axle has no steps so when you wanna remove the bearings on the other side you need a special DIY tool ot lots of patience and bent screwdriver........what else....that would be it I believe.....lets not even start with miche bottom bracket or their wonderful cog/carrier combo.....