You are reading a single comment by @veLLo and its replies. Click here to read the full conversation.
  • Hi all!

    Just a little update...

    So I tried to remove the freewheel on the wheel that need spoke replacement...

    Complete failure, I filed a few as I can from the two peg parktool remover, as discussed above, they were a fraction too big, but it would not let go, at the end I damaged the recess/grip on the freewheel and also the tool (a little, I hope it can be used again on my other wheel...)

    So I gave up and when the brutal destructive way (as suggested by Hippy earlier on that thread),openned the freewheel, put it in a vice and managed to remove it... I serviced the hub, found out that the spare spokes I had were too long, and that the spare 5 speed freewheel I had was wider than the original one... I could play with the spacers and re-dish the wheel, but fat like I am I will only manage to bend the axle as it would be sticking out more on the drive side, blah blah blah blah....
    blah blah blah blah....
    blah blah blah blah....
    Complains
    blah blah blah blah....blah blah blah blah....
    Complains...

    Bike servicing can be really annoying sometimes!

    Just found out that SJS were not stocking Regina freewheels anymore... anyway I don't want to spend £45 on a freewheel for that wheel...

    Loic

About

Avatar for veLLo @veLLo started