on the Miche design the chainring bolts screw directly into the alloy crank arms, the threads on 2 of mine have been stripped meaning the arms are pretty much useless now
Bore the threaded holes out to 10mm and use standard chainring nuts. If you want to be flash, do the 12x1 counterbore on the other side, or just spot face it to make sure the nut shoulder sits properly flat.
Bore the threaded holes out to 10mm and use standard chainring nuts. If you want to be flash, do the 12x1 counterbore on the other side, or just spot face it to make sure the nut shoulder sits properly flat.