Tool library / tool exchange. Post what you got and where you are

campag centaur

I have a Camag BB tool- the one that works with Miche BB's also.

Any good to you?

Me too. Am in Seven Sisters and home all week!

Hey all,

Does anyone in brixton have a chain whip and lockring tool? I bought a new wheel with fixed hub and need to secure the sprocket... will be my first fixed wheel (ss before...with 2 brakes ;) )...here's hoping don't f it up and remove the threading....

Cheers

Oh and I'm at UCL in the daytime so could also meet there?

Will trade tool use for beer x

I'm near Leyton station and own little Halfords tool set

Also chain link tool which is better than that included in the toolset, few tubes of lithium grease, silicon lube, high pressure pump, tufo sealant for tubs. If you really want to do some damage, I also have a Bosh drill with bits, sander, hammers, rubber and plastic mullets, good stapler to redo your saddle etc.

If someone breaks down nearby you're welcome to PM me. Right now I'm at home most of the time.

NW3:

threaded headset spanner
pedal spanner
allen keys
bb tool (20 splined and 8 tooth notched and campagnolo)
crank puller (regular and octalink)
cassette lockring tool (regular and campagnolo)
mole grips
nipple key (3.2, 3.3, 3.5 and 13, 14, and 15 guage)
chain tool (1/8" and 3/32")
cone spanners
screwdrivers
puncture repair
13t freewheel tool (4 tooth)
lockring tool
chainwhip (1/8" and 3/32")
tracknut spanner

Does anyone have a square taper crank puller I could borrow this evening, ideally around the W6 area?

Does anyone have a Royce Bottom bracket tool that I can borrow please?
I don't want to use my DIY pin spanner for such a pimping bit of kit.

^The thing with 6 pins sticking out.

Doesanyone have a tool for a Raleigh BB cup?

Or is the hammer & screwdriver my best bet.

[Edit] The inner bit, that is, not the lockring.

I just use a large adjustable spanner, carefully. I did see a Raleigh-specific tool in a shop somewhere but failed to buy it.

headset press, Auckland NZ

Couple of tools needed for this weekend.....

BB Tool that works with Miche
Crank tool to fit cranks to BB

Can anyone help me? I live in Brixton, but I'll cycle pretty much anywhere in reason to pick up/drop off

Cheers

J

Does anyone have a hacksaw I could borrow sometime this weekend or next week? Hackney or central ways if possible but I'm willing to travel.

they only cost about 3 quid

i have almost every tool i need for campa & shima NO ..

/S

they only cost about 3 quid

3 quid I'd rather not spend for the sake of cutting one steerer tube. I thought that was the whole point of this thread?

So if anyone could help me out that would be much appreciated.

heres my tools currently available-SW10 area.

Square Taper crank puller with other parts (need to find out for which, i think octalink etc)
Lithium grease
Complete spanner set
Socket set
Screwdrivers etc.
Allen Key set
Cable Cutters
Universal Spoke key
GT85

i think thats it but im sure theres more.

^ the square taper crank puller probably works with ISIS too, and you can just pop a 5p in to make it work with octalink

^ the square taper crank puller probably works with ISIS too, and you can just pop a 5p in to make it work with octalink

hmmm interesting , ill be sure to remember that, thanks!!

Has anyone got a Pop Rivet gun that's small enough to re-attach a headbadge?

I'm guessing very small rivets are needed!

Thanks
D

Need a Shimano BB tool to get this muv'ucka outta my frame.
I'm in Euston, halp.

So this is a standard size right?

Does that mean these are made for varying sizes? Are there varying sizes? Is there another difference I should know about?

Those tools vary depending on your BB.
the two you've got there are for BB lockrings.
I'm not sure if there is a standard size, but the single notched BB tools like those usually work.

I was thinking more of this

BRM has mine, if you can arrange to pick it off of him then bring it back to me (undamaged), (Euston during the day) you can borrow it.

Oh nice, sounds good.
I'll PM him now, thanks.