Stuck sproket - rotafix not working

Posted on
  • my sprocket is totally stuck, no amount of rota fixing can get it off (i rotafixed it on only a week or so ago)

    i've tried adding a bit of wd40 to loosen it to no avail, is there anything a lbs will be able to do that i can't?

    yes i have UTFS and everyone just says rotafix!

  • get a chain whip.

  • get a chain whip.

    i was led to believe that using the rotafix method exerts more torque on the cog though (better leverage and that)

  • i find a chainwhip easier cos you can get the wheel/chainwhip in a position you want, and you can put your whole body weight into it easily.

    just my opinion though.

  • You used the wrong four letter acronym.

    What you want is HTFU, not UTFS.

  • You'll get it off with a chainwhip. It's easier to apply the pressure needed.

  • do a skid without a lockring?
    (a frontbrake would be helpfull)

  • Buy the Shimano chainwhip from hubjub and HTFU

  • +1 on the skid method. This works even when you don't want it to.

  • are you sure have set up right and turning in the right direction? i.e. the opposite to before

  • Chainwhip and htfu are the order of the day. Now go to bed with no beer and get the train into work tomorrow.

  • Yes

  • chainwhip + vice = win.

  • No apologies for saying this - it's worth being sure - Have you taken the lock ring off?

  • If it still doesn't come off try to put a generous amount of plus gas penetrant fluid available from most motor factors,. halfords, screwfix. In combination with chainwhip it's gonna remove it :-)

  • 50/50 mix of automatic transmission fluid and acetone, let it soak in then make sure the wheel is secure (leave the tyre on for grip) and have at it with a chainwhip.

  • I think he got if off 2 hours ago...

  • :)

  • sometimes all it takes is belief

  • All I have to offer is how much I heart my LeVeL hub with its three Torx bolts. No matter how long the cog's been on there it can be removed with sweat or swearing.

    I R smug barsterd :^)

  • sometimes all it takes is belief

    It took me a year to get a loctited Phil cog off the freewheel side of my Phil hubs.

    I never doubted the power of forged Dura Fucking Ace

  • hammer and peg.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Stuck sproket - rotafix not working

Posted by Avatar for Nef @Nef

Actions