Wanted: 24.8mm Seat post & Misc. French bits

Posted on
  • Ok, so I've had zero luck finding one through parts bins and my searches online have been just as fruitful.

    Has anybody got a spare 24mm/24.8mm seat post in fairly good condition? Doesn't matter too much if it's a bit grubby, but as long as the metal is in good nick.

    Also, anybody with any other spare bits that fit 80's Peugeots, let me know I may be interested.

  • If you get that seatpost, there may be hope for me!

  • I have a quil stem for a french bike as they are not usually the standard size.

  • What's your price?

  • What's your price?

    For the stem? £10. Cheers

  • Dante and Justinnnnn dooo the business!

  • You will need to measure the inside of the steerer on the forks as sometimes they are standard 22.2. French sized quil stems are 22. dead.

  • What's .2 of a mil between sirs? Do you have a picture of it?

    If you can hang on until tomorrow I can get back to you on buying it (I'm travelling back to Swansea tomorrow where my frame is lurking), how's that?

  • Dante and Justinnnnn dooo the business!

    £10 and a reach-around?

  • £20.

  • I have a French threaded headset, if you need one.

  • What's .2 of a mil between sirs? Do you have a picture of it?

    If you can hang on until tomorrow I can get back to you on buying it (I'm travelling back to Swansea tomorrow where my frame is lurking), how's that?

    No problem. let me know when you can.

  • I think I may have sourced a stem from my Dawes, it's a bit tight but I can get it in. Thanks for the offer though, much appreciated.

  • your best bet with the seatpost is to get one of those ugly ones for a tenner from decathlon and shim it or have one made.

  • The decathlon has been mentioned a couple of times but whenever I've looked at them I can't find the size that I need or one nearest, have you got a link?

  • the one they sell is 23.4 or something, as mentioned you'll have to shim it. you'll have to get to a store to see it

  • I have peugeot bits

  • There's an air of mystery to your reply..

    Do you have a seatpost to fit a carbolite frame?
    What else do you have?

  • I want them now. :(

  • no seatpost in carbolite

    I have pre 1980 peugeots..6 or so and parts.

  • [Resurrecting the thread..]

    41velo: Could you give me a list of parts you have with sizes, etc?

    Cheers.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Wanted: 24.8mm Seat post & Misc. French bits

Posted by Avatar for Concrete_Island @Concrete_Island

Actions