You are reading a single comment by @Deluka and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Deluka
Sorry poor knowledge of names of hub parts :(
This is a stock photo of the hub in question, the locknuts seem to be an integral part of the hub and are not in pairs... the front forks fit neatly either side of the locknuts...
The other issue is that the locknuts are too large to fit the dropouts even if the spacing were correct, I guess as mtbs front forks normally fit on the axle [as they do on my old mtb], not the lock nuts as in a track bike. Any ideas?