For Sale: Tektro R730 nut fitting calipers, Park Tool, Weinmann 947 calipers

Pair of brand new Tektro R730 dual pivot calipers. 47-57mm reach. Nut fitting, so they would be perfect for upgrading the brakes on an older frame. They have only been fitted on the bike once and never been out of the house (I realised I need an extra 1mm of reach after fitting them). More info here: http://www.tektro.com/02products/10qb-1.php £Gone

Park FR-2 Freewheel Remover. £Gone

I also have a pair of Weinmann 947 calipers. Not the greatest condition - the springs are a bit out of whack and the front is missing the pinch bolt. They are as pictured (no brake pads). £Gone

I don't really have time to post any of this, so would prefer London pickup/meet.

PM'd RE: Weinmann 947 calipers

I'll take the freewheel remover!

pm'd

Weinmanns and Park Tool are provisionally spoken for. Tektro calipers still available.

Park Tool and Weinmanns are now sold.

I'll take the calipers if by 'nut fitting' you mean they have those shaped washers and don't require drilling of forks etc.

(I have a brand new but frankly inferior 'Alkonga' front brake I bought from BLB that will probably deliver the reach you desire. If you haven't sorted one.)

Yes, this is what I mean by 'nut fitting'. I think Sheldon calls it 'non-recessed'. They're like the one on the right in this picture:

Thanks for the Alkonga offer, but I already have these installed: http://www.sjscycles.co.uk/product-Tektro-Tektro-R556-Dual-Pivot-Caliper-Brake-55-73-mm-Very-Deep-Drop-Nut-Fitting--Front-and-Rear-79.htm. They are quite nice, but not as nice as the 730s.

Either way, I PMd you.

All sold