You are reading a single comment by @eddie and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@eddie
this is what wikipedia writes (yes yes i know, but still)
*
This system was designed by Shimano. The Octalink system provided a greater contact area between crank and spindle, so it had a stiffer interface. Octalink exists in the marketplace in two variants, Octalink v1 and Octalink v2. The difference between the two can be seen by the depth of mounting grooves on the bottom bracket spindle. XTR, 105, Ultegra 6500 and Dura Ace 7700 cranksets mate to version one bottom brackets, while more recent mountain bike designs use the deeper-grooved version two. The system is proprietary and protected by Shimano patents and licence fees, thus relatively few companies aside from Shimano produce Octalink cranksets. Many competitors have adopted the square taper and ISIS designs as an alternative. In use, Octalink has been shown to loosen because it is not a taper-fit but merely a tight spline fit. Reverse torque loads can cause the crank bolt to undo, and the crank can be irreparably damaged if this is not checked.*