You are reading a single comment by @hugo7 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@hugo7
Although I didn't know it, I used no. 16 for removing a stuck stem.
I used a jig-saw, just cutting carefully at 12 o'clock and 6 o'clock. as the alu is softer than the steel it works quite easily if ur careful.
Then I used a sharp screw driver to cut away the last thin wall of alu...
... but if you're not bothered about the paint £15 sounds allot easier.