Wanted: Cheap bike parts

looking at buying the following in good working condition:

UPDATED parts needed:
clincher wheelset 700 - silver
165 cranks 130/144 + chainring
stem(ITM, 3TTT, cinelli) - length around 8-9
riser bars

165 cranks 130/144 + chainring - budget?
riser bars Titec Hellbent 26.5" wide, 25.4 clamp, £10
seatpost - length? diameter?
saddle - WTB thing off a Kona JtS, £5

165 cranks 130/144 + chainring - budget?
riser bars Titec Hellbent 26.5" wide, 25.4 clamp, £10
seatpost - length? diameter?
saddle - WTB thing off a Kona JtS, £5

cranks+chainring - no budget
seatpost - around 21cm in length & 27.2 diameter

Stronglight 165mm 130PCD track cranks and matching Stronglight JP-SBB 111mm ISO BB, with BB fitting tool and TA 51T x 1/8" ring (not shown) £75

sorry to but in mitre but i see no reply to your offer of your crank and bb, is it still available

Yes, still up for grabs.

i got a bareknuckle frame with a english thread bb, the bb housing is 68mm would your crank fit

ISO/English = generally the same. the chainset will work in your bareknuckly rogeroo. The only thing you need worry about is getting the correct BB for your chainline.

cheers for that deadly, i have read loads of stuff on this subject and think i need a 42mm chainline but think it will depend on the crank i get...

Yes, the BB is for a 68mm English (BSC) threaded shell, and with the cranks will give a chainline of 42mm (normal track standard). ISO refers to the taper, as opposed to JIS. Stronglight switched from ISO to JIS a few years ago when they also changed to 144 pcd, my cranks are from the older design. Also available without the ring for £60, if you're looking for other gearing.

cheers for that mitre i am now gonna see if i can get the money together, got some bits n bobs i also need to sell, but i will give it my best shot!

riser bars a fiver/ vetta black saddle £3

still looking for a pair or front/rear(track or cassette hub) wheels preferrablely in silver.

rims - something along the lines of 'Mavic CXP 10'.