High-rise threadless stems (17+ degrees)?

Posted on
  • I'm fancying a pretty high-rise stem to replace my current 5 degree one, which I'll fit upside down so it'll give a little bit of drop. Yeah I could just take a few spacers out to give me the same drop but it'll look 10 times better this way, and I've got the option of going even lower by removing the spacers after that anyway. I've seen a few 17 degree ones which will give me zero rise on my frame but can't find much else except the BBB high rise stem which is a bit extreme at 35 degrees. Does anyone make anything in between? Needs to be 1 1/8", ideally 100-110mm length to fit 25.4mm bars (could shim a 26 stem), and black although I'm going to paint it black anyway to get rid of logos.

    Cheers.

  • I'm fancying a pretty high-rise stem to replace my current 5 degree one, which I'll fit upside down so it'll give a little bit of drop. Yeah I could just take a few spacers out to give me the same drop but it'll look 10 times better this way, and I've got the option of going even lower by removing the spacers after that anyway. I've seen a few 17 degree ones which will give me zero rise on my frame but can't find much else except the BBB high rise stem which is a bit extreme at 35 degrees. Does anyone make anything in between? Needs to be 1 1/8", ideally 100-110mm length to fit 25.4mm bars (could shim a 26 stem), and black although I'm going to paint it black anyway to get rid of logos.

    Cheers.

    No, it wont.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

High-rise threadless stems (17+ degrees)?

Posted by Avatar for Lornholio @Lornholio

Actions