Dura Ace 7600 hubs specs

Can someone give me the pcd and flange width for a pair of DA 7600 high flange hubs please?

Thanks

Dura Ace HB-7600, front
Right flange ø: 60.0 mm
Left flange ø: 60.0 mm
Centre to right flange: 33.3 mm
Centre to left flange: 33.3 mm
Spoke hole ø: 2.5 mm

Dura Ace HB-7600, rear
Right flange ø: 60.0 mm
Left flange ø: 60.0 mm
Centre to right flange: 37.0 mm
Centre to left flange: 37.0 mm
Spoke hole ø: 2.5 mm

Great hubs, they spin forever

Cheers Rusty

Is it definately 60mm and not 66mm? The DT calculator lists the front one as 66?!

I used http://lenni.info/edd/

Great hubs, they spin forever

I have a 7600 that doesn't spin that well actually... ;) I think it might spin again if I clean all the shit out of the bearings though..

I have a 7600 that doesn't spin that well actually... ;) I think it might spin again if I clean all the shit out of the bearings though..

Might just need an adjustment of the cones. That's the joy of loose balls. Tinkering!

I used http://lenni.info/edd/

Ive not seen that one before, even better than the DT one it seems!

Cheers.

Somone on here made it and posted it up a while ago. It's almost impossible to find on the internet. Took me 15 minutes last time. I've now got it bookmarked.

anyone know where i can buy the rubber seals to stop gunk getting into the bearings/cone? or is it case of trying random ones until i find one that fits

Might just need an adjustment of the cones. That's the joy of loose balls. Tinkering!

Most of all it needs a matching used front-hub, low flange version... and a rim.. :) I got the hub for £2 at a fleamarked in front of a local bikeshop ;)

Not sure if these are any help, I found them in an old shimano spares file I have

Rear Small Flange

Front Small Flange

Nothing on file for the large flange though, sorry

I used http://lenni.info/edd/

Brilliant resource that-cheers Rusty!

Saved me a lot of head scratching trying to get the correct data for my first wheel build-going to be attempting to lace some dura ace small flange hubs to some cheap but decent cxp23's to compensate (?) for my hoiday being scrapped!

More spare parts incl article numbers here
Incl high flange