Wanted: 2 quill stems, 26mm Specialized crosstop lever

Anyone got spare quill stems in good shiny condition?

I'd like a 90mm or so Cinelli XA or SA stem in silver - can swap for an XA in black or will pay dorra.

I'd also like a 50-60mm regular 26mm stem to fit my nitto bullhorns. Nitto, 3ttt or something decent.

Also after a Specialized crosstop lever in the smaller 26mm size. And if you've already stripped the paint off it and polished it up, then all the better.
Can swap a 31mm left hand version, unused, or can pay dorra.

absolute dogs what nots Cinelli Record perfect above the insertion mark, in silver, 10cm. £15 posted

Similar to 1a but no split on bar aperture, shaft down to the bars is tapered to be wider at the bars. I've never seen one before..............

also 11cm in older style ie no badge on the front, straight cut on bar aperture, very good apart from some plonker has stood a bike upside down on it and scratched the top of the stem on the bar bulge, £8 posted

Also after a Specialized crosstop lever in the smaller 26mm size.

Is there a 26mm size? Mine have a 23.8mm clamp, to fit the thin section of a 26.0 bar. Worth bearing in mind if you were hoping to fit them next to the stem! £10 the pair posted if you're interested. Also Salsa O/S ones with original 26.0mm shims £18/pr posted.

absolute dogs what nots Cinelli Record perfect above the insertion mark, in silver, 10cm. £15 posted

Similar to 1a but no split on bar aperture, shaft down to the bars is tapered to be wider at the bars. I've never seen one before..............

also 11cm in older style ie no badge on the front, straight cut on bar aperture, very good apart from some plonker has stood a bike upside down on it and scratched the top of the stem on the bar bulge, £8 posted

The Record sounds good. I'll have it.
PM on its way.

Is there a 26mm size? Mine have a 23.8mm clamp, to fit the thin section of a 26.0 bar. Worth bearing in mind if you were hoping to fit them next to the stem! £10 the pair posted if you're interested. Also Salsa O/S ones with original 26.0mm shims £18/pr posted.

That's what I meant, yes. Too idle to look it up :-)
I'll have the 23.8 levers please.

PM on its way

nice to do business with!