You are reading a single comment by @Big_Block and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Big_Block
the next step was to create a cast of the saddle. I first made an outer mold with the cover still on the frame. Modeling clay was used to support the cover during the casting.
This was to get an accurate cast of the inside without the pressure from the plaster.
The cover was then removed from the frame and the cover was placed in the outer shell to hold its shape. Plaster was then poured into the cover to make the shape needed.
