Olo - can you shortly explain how to use bearings + glue? I saw people using cables + locks but I'm not sure how to secure my saddle with bearings.
easy.
position bike so that the bolt your working on is level.
place a small bearing into the bolt (not too big - you'll want there to be a space in between the bearing in the center and the inner wall of the bolt so if you ever have to remove it, it will be easier to pry out)
fill to the top with superglue.
let it sit over night.
when it's dry enough so it doesnt drip or move around
do the other bolt(s).
easy.
position bike so that the bolt your working on is level.
place a small bearing into the bolt (not too big - you'll want there to be a space in between the bearing in the center and the inner wall of the bolt so if you ever have to remove it, it will be easier to pry out)
fill to the top with superglue.
let it sit over night.
when it's dry enough so it doesnt drip or move around
do the other bolt(s).