I loosen the drive side nut and grab the front of the wheel and push it towards the frame and tighten. Then loosen the other side and pull the wheel towards the center and tighten the nut on that side. I usually get it too tight doing it this way.
@UH_OH started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I loosen the drive side nut and grab the front of the wheel and push it towards the frame and tighten. Then loosen the other side and pull the wheel towards the center and tighten the nut on that side. I usually get it too tight doing it this way.