You are reading a single comment by @melon and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@melon
i recently removed my cranks using this park tool: http://www.parktool.com/products/det...6&item=CCP%2D2
i have the square taper type of spindle with a threaded rod on the end where a nut sits to hold the cranks.
i dont really understand how i re-install the cranks back onto the spindle. how do i press it back onto the tapered spindle?
im guessing i dont just push it on tight and do up the nut, as i had to use quite a bit of pressure to undo them with the removeing tool.
ive done some searches but i only ever find info on how to remove the cranks.