What kind of paint/finish is this?

Posted on
  • i like this kind of finish, its neither gloss or matt, and reminds me of the finish on gun barrels. it has a kind utilitarian ruggedness that would suit my new hot rod esque build.

    what sort of finish is this and how do i do it?


    1 Attachment

    • 2302627495_b14ac4bbdb.jpg
  • it looks anodized.
    but i don't know, ask @ fastboy cycles.

  • thats a nice lookin whip boy

  • not a fan of those bars... althought aestheticall pleasing they are not functional enough to benefit a ride.

  • it´s actually quite comfortable to ride with.

  • I reckon its a Satin finish...

  • it looks anodized.
    but i don't know, ask @ fastboy cycles.

    The frame looks to be steel (?) so I doubt it is anodised - although it might be titanium which you can - at a push - anodise.

    I think what Andy said sounds right, Satin.

  • i dont think its anodised becuase from the pictures the finish doesnt apear to be perfectly uniform.

    not sure about this, but i though satin was a bare metal finish achieved by light sanding. it could have been done here and then painted over, but the paint must be very thin for the texture to show through.

    i reckon those bars are quite comfy, but i wouldnt trust them after being heavily rained on a couple of times.

  • I know with the spraypaints I get they come in an eggshell finish, I like it allot.
    Doubt its sprayed but same finish.

  • Maybe it is blackened like gunbarrels?? No?

  • Of the choice of finishes he mentions on his site i would say it is patina

    +

    which would be what Nahguavkire said

  • its eigther a oil finish on a steel frame or its jet blacked, both are used in gun smithing. the oil finish simply gets burned onto the metal at a certain temperature, the jet black is a acid finish. or its simply waxed with a metal finish wax like old black smith garden fences used to be.

  • gun blacking for barrels and actions is not an acid finish but alkali. the main ingredient is caustic soda.
    i know this because my dad is a retired gunsmith who had a blacking tank. the solution was heated and gave off a lot of fumes. the metal was highly polished then degreased with lime and hot water then immersed in the tank for about 10mins then rinsed in a hot cutting oil/water mix then oiled. it gave a deep lustrous black.
    all those little tubs of gun/blue black are a waste of time as the results are patchy and dull in comparison.

  • Ive noticed caustic soda turning aluminium blue/black, steel always seemed unaffected to me.

    Must be some tough alkali they have.

    Is this 'gun blacking' done in the same way nuts/bolts/axles are? They refer to it as 'self colour black' in hardware stores, always assumed they added something to the steel in the melting pot.

  • there are other chemicals in the mix as well as caustic. caustic will eat alloy (why it's used for stuck seatposts).
    i can't see why they would go to the trouble of blacking axles/bolts etc in the same way as gun parts.
    they wouldn't add something to the steel to colour it. all these finishes are basically oxide films with a slightly different chemical make up to vary the colour.

  • so this isnt exactly somthing i could achieve at home. where do you reckon i could get a finish like the above example?

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

What kind of paint/finish is this?

Posted by Avatar for melon @melon

Actions