You are reading a single comment by @retrodicorsa and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@retrodicorsa
Edinburgh Cycles have a special on their own branded Revolution Tune Up Workstand for £49.95 - I've got a virtually identical one that didn't come from them and cost me about £60 2 years ago, I can highly recommend it and at this price it's one of the cheapest available. Looks same as the one in the Merlin Cycles deal, but that toolkit ain't worth £50.
http://www.edinburghbicycle.com/ebwPNLqrymode.a4p?f_ProductID=5379&f_SortOrderID=1
They're also doing a tenner off the Specialized Air Tool Comp track pump, also one of the best I've ever seen/used:
http://www.edinburghbicycle.com/ebwPNLqrymode.a4p?f_ProductID=6857&f_SupersetQRY=C252&f_SortOrderID=1&f_bct=c003154c003146c003272
BTW, just bought an Elite from Wiggle too, until a coupla days ago it was half price at £75. It's better for big jobs where you need a lot of leverage on the frame like chasing/facing/fitting BB or headset as it is very rigid and holds the frame very firmly, downside is you have to remove one of the wheels, and it's not so convenient with track ends. The Revolution type one is a good all round bet and a great bargain, not quite so good for jobs like the above.