You are reading a single comment by @tornadotony and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@tornadotony
Cinelli Giro D'Italia 64-40 handlebars 40cm wide centre to centre
and 1' quill stem 10mm length
Very good condition with some tape marks and a few minor scratches + obvious from whre it was fitted.
some blurb on them:
The Cinelli model 64, also known as the Giro D'Italia is the shallowest drop of the three Cinelli road bars. At the tubing end, it has a 24.2mm outer diameter and a 1.7mm wall thickness. Like many bars, the wall thickness will vary, between the ends, because of bends and bulges. A sleeve is used to build the bar center diameter out to the Cinelli 26.4mm. The sleeve covers the centermost 119mm of the bar and at its center has a 40mm length of knurls for the to stem to grip. The straight area of the top section is 250mm long. A groove is pressed into the front face of the top section of the bar, and extends through the forward bend. This groove is to recess the brake and shift cable if an aerodynamic brake/shift lever is used. The drop measures 138mm center to center. The lower flat section of the drop measures about 4.25" (110mm). The Giro D'Italia is Clear anodized leaving it a Silver color and available in four widths, 38- cm, 40 cm, 42 cm, or 44 cm. The 42 cm model weighs 311.5 grams. Made in Italy.