You are reading a single comment by @freddo and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@freddo
bars are designed to be taken out at a specific angle. without poatochop I cant do a diagram, but basically underneath the front bolt, there is usually a semicircular cutout on either side. this is designed so that the *inside *curve of the bar goes through more easily. So the diagram above should be "push and turn anticlockwise"