-
• #2
Just wants running in, most likely.
Is your chainline ok?
-
• #3
100 miles.
lube.
check. -
• #4
The chain line looks pretty sweet (and it was fitted by my LBS who is pretty good)
I'm gonna degrease it an re-lube to see if it makes a difference
-
• #5
Search the forum for chain maintenance threads.
Degreasing may not be the way forward.
-
• #6
Sweet! Cheers!
-
• #7
I had an SRAM PC-1 chain and it was shocking; some links seemed to be distorted and clicked and scraped making an awful racket. As soon as I could I got decent chain and then silence.
I'd recommend KMC for a budget chain.
-
• #8
hmmm, I managed to destroy a KMC in about 200km, running it too tight with a slightly off centre chainring. preactically snapped it. upto the point it failed, it just got noisier and noisier.
-
• #9
picked up an Izumi chain from the jumble today, should silence my drivetrain, only £10
-
• #10
picked up an Izumi chain from the jumble today, should silence my drivetrain, only £10
i doubt it, noisy chain ;)
-
• #11
Hey
I just had a new chain ring and chain fitted today and while riding home I was surprised how noisy the new set up was!
Im am now riding a 48T/16T with an SRAM SS Compatible 1/8 Chain (but it was pretty cheap @ £7.99).
My previous setup was ultra quiet so I'm a bit worried....
Any Ideas?
Are you sure the noise isn't coming from the rear cog? The teeth on the cog could be worn a bit to fit your old, worn out chain.
-
• #12
picked up an Izumi chain from the jumble today, should silence my drivetrain, only £10
i doubt it, noisy chain ;)
+1
-
• #13
ah, cock. oh well.
-
• #14
I quite like the izumi chain, but the mid range one at £16; never had a signifigant noise issue.. running euroasia cog
-
• #15
my current noise issue is a combination of a newish DA cog (still not worn in the shoulders on the teeth) and a cheap KMC chain, the rollers are loose and rattle a bit.
I think the Izumi I got is the same one, just slightly cheaper at the jumble
Hey
I just had a new chain ring and chain fitted today and while riding home I was surprised how noisy the new set up was!
Im am now riding a 48T/16T with an SRAM SS Compatible 1/8 Chain (but it was pretty cheap @ £7.99).
My previous setup was ultra quiet so I'm a bit worried....
Any Ideas?