Chain Ring Teething Problems

Posted on
  • Hey

    I just had a new chain ring and chain fitted today and while riding home I was surprised how noisy the new set up was!

    Im am now riding a 48T/16T with an SRAM SS Compatible 1/8 Chain (but it was pretty cheap @ £7.99).

    My previous setup was ultra quiet so I'm a bit worried....

    Any Ideas?

  • Just wants running in, most likely.

    Is your chainline ok?

  • 100 miles.
    lube.
    check.

  • The chain line looks pretty sweet (and it was fitted by my LBS who is pretty good)

    I'm gonna degrease it an re-lube to see if it makes a difference

  • Search the forum for chain maintenance threads.

    Degreasing may not be the way forward.

    http://www.kmcchain.com/index.php?ln=en&fn=service#2

  • Sweet! Cheers!

  • I had an SRAM PC-1 chain and it was shocking; some links seemed to be distorted and clicked and scraped making an awful racket. As soon as I could I got decent chain and then silence.

    I'd recommend KMC for a budget chain.

  • hmmm, I managed to destroy a KMC in about 200km, running it too tight with a slightly off centre chainring. preactically snapped it. upto the point it failed, it just got noisier and noisier.

  • picked up an Izumi chain from the jumble today, should silence my drivetrain, only £10

  • picked up an Izumi chain from the jumble today, should silence my drivetrain, only £10

    i doubt it, noisy chain ;)

  • Hey

    I just had a new chain ring and chain fitted today and while riding home I was surprised how noisy the new set up was!

    Im am now riding a 48T/16T with an SRAM SS Compatible 1/8 Chain (but it was pretty cheap @ £7.99).

    My previous setup was ultra quiet so I'm a bit worried....

    Any Ideas?

    Are you sure the noise isn't coming from the rear cog? The teeth on the cog could be worn a bit to fit your old, worn out chain.

  • picked up an Izumi chain from the jumble today, should silence my drivetrain, only £10

    i doubt it, noisy chain ;)

    +1

  • ah, cock. oh well.

  • I quite like the izumi chain, but the mid range one at £16; never had a signifigant noise issue.. running euroasia cog

  • my current noise issue is a combination of a newish DA cog (still not worn in the shoulders on the teeth) and a cheap KMC chain, the rollers are loose and rattle a bit.

    I think the Izumi I got is the same one, just slightly cheaper at the jumble

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Chain Ring Teething Problems

Posted by Avatar for bigdazfaefife @bigdazfaefife

Actions