You are reading a single comment by @novocaine and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@novocaine
pin spanner is the easiest tool in the work to make aside from a hammer. if your unsure on it take a bolt that fits into the hole and put a screw driver between it and the axle and use it like a spanner. if you can get a chunk of metal then two holes and two bolts you have a pin spanner (you may need a hole in the middle too) . hell i've even seen it done with a peice of wood and two nails. just go easy on it.