You are reading a single comment by @pnagle and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@pnagle
Thompson Seat Post is 1" so is the other Richtey one.
The cranks are off a Road Bike they are 170 at 130 BCD (so they could be off a mountain bike originally)
No its not a 10 speed chain (if it were I would have used it) Looks too be 1/8 (havent measured, but I should be able to tell)
The hubs on the wheels are Shimano Ultegra
The frame is a 59 from the top of the bottom bracket to the top of the seat post. It is Reynolds 531 tubing as well. It has an FAG bottom bracket which needs to be removed (the drive side crank has been cut) Any bike shop should be able to do it...I might run to the shop tomorrow and have them do it anyways and throw the Shimano one in.
Yes the Nitto Bars are free. But I put the wrong ones these are B105 RD bars not 115's.