Wanted: 103mm Bottom Bracket to go with sugino 75 crankset

so, my new frame has a bottom bracket width of 103mm so i cant use a sugino 75 BB whici i was planning on using.

Does anyone know of any other good quality 103mm BB that would work smoothly with the s 75 crankset?

https://www.londonfgss.com/thread3372.html

Campag Centaur 111mm
cheap as chips, been running mine for 8 months no probs.

has to be 103mm ISO

Just fitted some 75's to a Miche BB, works nice

get the Campag Centaur in 107, it is ISO. had to use a 111 for the goldtec's.
what hubs you gonna be running?

i think there must be some misunderstanding...point A: you want 103 ISO BB...which means you cant get one......not even phil woods.......only JIS low profile.....point B: you will get a 42mm chainline with sugino 109.5 BB. if you get 103 ISO BB the chainline will be 39mm????and the crank will rub on the BB shell or the chainstays...i suppose..... what kind hub you gonna run???? the old suzue???

and the shortest JIS you can get is sugino messenger sealed bearing one.....

FSA do 103 ISO's ive got two of them used them on some chours cranks and some strong light speedlights

i think there must be some misunderstanding...point A: you want 103 ISO BB...which means you cant get one......not even phil woods.......only JIS low profile.....point B: you will get a 42mm chainline with sugino 109.5 BB. if you get 103 ISO BB the chainline will be 39mm????and the crank will rub on the BB shell or the chainstays...i suppose..... what kind hub you gonna run???? the old suzue???

and the shortest JIS you can get is sugino messenger sealed bearing one.....

Hey man - i got confused with what my frame supplier was informing which threw me of course - i was a noob at BB detailing (JIS ISO etc) til earlier this evening.

All i need is a sugino 75 BB - thats it. sorry for wasting time for answering my pointless questions!

...or buy one of these...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260344946330&cguid=cc61852611c0a0e204960b26ffaa91d1

Miche make a 103mm symmetric sealed BB that works for a Sugino 75.

Or the Sugino 75 BB itself, if you want to trade weight for maintenance hassle.

...or buy one of these...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260344946330&cguid=cc61852611c0a0e204960b26ffaa91d1

That's JIS. The 75 takes an ISO taper.

Miche make a 103mm symmetric sealed BB that works for a Sugino 75.

The right Miche for SG75s would be with 107mm axle.

The right Miche for SG75s would be with 107mm axle.

Yes. My mistake.