You are reading a single comment by @xroads and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@xroads
I noticed the same on my miche sprocket (15t) and on-one hub last night. The last time I tightened the lockring + sprocket was 500 miles ago, and yesterday I decided to clean chain + sprocket, when I found that the lockring was finger loose. Never had a problem with it slipping though. A bit worrying on my setup, as the sprocket sits on the miche carrier and is held in place by the lockring.
I suppose I could turn the carrier around, so as to sandwich sprocket between hub and carrier, but that would offset my perfect chainline.
I am now gonna check it weekly! If it works loose again, I'll try some ptfe tape first.