You are reading a single comment by @BillB and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@BillB
I'm having problems keeping the lockring tight on my Miche rear hub, I have the sprocket (on-one 18t) on the hub, rotofixed nice and tight. Then the lockring hammer and screwdrivered into place, it still works loose after a couple of weeks. has anyone had this problem and found a good solution. I was thinking about a very thin rubber ring between sprocket and lock ring as it would grip well on both surfaces, my other thought was a small amount of loctite.