Some one to lace up some new rims

Posted on
  • Can anyone recomend a shop to get some fir rims taken off and some open pros put back in there place.

    Is there a guy on here who builds wheels? Did a quick search but cant find the details.

    Cheers

    Kev

  • Oh. regards doing it myself. I am a technical luddite and there for the missus. If they were for me I could live with the guilt of there untimely disintegration

  • andy ellis has the skills.....check http://www.fixedgearlondon.com

  • email him and ask....

  • Cheers.

    I'll email

  • arup (on this forums) also builds wheels too. Or did I make that up? See:
    http://www.yogarup.com/wheels/

  • I'll do it in trade for your FIR rims.

  • I can do it for you. I charge a tenner per wheel. It depends on whether the ERD (Effective Rim Diameter) on the Open Pros are the same as the FIR rims. I measured the ERD for Open Pros last week for a set that I completed yesterday and it was 604mm. If your existing rims are ±1mm then you'll have to get new spokes. Perhaps up to 2mm. It's ok if the spokes end up a bit on the short side as you can still bring up the tension, but too long and you'll reach the end of the thread.

    Trampsparadise has first refusal of course.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Some one to lace up some new rims

Posted by Avatar for lardy @lardy

Actions