"Wanted/Needed" Sticky

£12

I need forks. Steel, 1 inch, at least a 19cm steerer, threaded. Less rake the better, less clearance the better. Drilled or not drilled not bothered about the color either.
Any shite (but not cracked) 165mm cranks not bothered about anything but the uncrackedness.
Any yellow anodized bits - riser bars, stem, seatpost 27.2 or smaller, BMX cranks/chainring.

And any old bits like screw-on rear hubs, old 700c or 27in wheels, crap cranks, crap bars, stems, frames, etc. etc. etc. - trying to build a fleet of polo bikes which may eventually be sold cheap or traded for stuff.

.

Tramp - I have a Bianchi Pista rear track wheel for dirt cheap (Flip/flop hub). A little weather worn but never seen a brake. Yours for a tenner if you want it. Will be bringing it up to the track on Sunday. Also have a old Phil 1970s front hub, rusty, but with brand new bearings in it (built it into a wheel but these hubs were `designed' to have a little play in them and I just didn't like it for everyday use) - free to you.

[Edit: bugger, not sure if I'm making the London Calling track day due to domestic issues. Wheel+Hub still yours if you want 'em. If I don't make it will be in London early August. Will let you know when.]

trampsparadise Any shite (but not cracked) 165mm cranks not bothered about anything but the uncrackedness.

Got some 165 Stronglight cranks, only caveat being that the left crank 'removal' thread got knackered, and BikeFix cut an O/S thread to get it off with their special tool.

Basically, once fitted, you'll need to go to BikeFix (or similar) to get it off again. Other than that, they're in good condition. I won't be using them again cos I've reverted to 170s.