You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
-
Limit screws?
Could also just be cacked up if it’s previously been used mostly at the top of the block and hasn’t been shifted down to the wee end much/at all.
M_V-
Thanks all. How do I reset the limit screws? Like what’s their default position. They have certainly had a fair bit of adjustment.
Re: bent mech hanger. Should I just take it to the LBS? It will be used by my lad who hasn’t used gears before so won’t be a disaster if it sticks in the bigger cogs.
-
Could also just be cacked up if it’s previously been used mostly at the top of the block and hasn’t been shifted down to the wee end much/at all.
This is my guess too, can you push the parallelogram in by hand?
Tonts
se1derful
Whats up with this rear mech? It’s completely non-tensioned and it won’t line up with the small cog. Bent mech hanger? It’s an islabike beinn 20 with a sram derailleur.