Any question answered...

Earth and roots.

The one I just threw out.

Rep

Krinner

And @andyp Cheers I think I’ll end up with another Garmin. I forgot you need speed, cadence and HR sensors as well. And my 530 lasted well, until I dropped it on the bike on a concrete floor and then it rained etc.

Anyone want a bunch of DVD cases or know where to get rid of them? Apparently not recyclable.

I would like to replace this capacitor in a sodium street lamp. What could I buy that would work?

1 Attachment

I'm no sparky but that looks like 6 microfarads to me.
https://www.bltdirect.com/capacitor-6-micro-farad-240-volt?adcid=pla&_intent=LOW&gad_source=1&gbraid=0AAAAACpp9Iasfove9fRU3nusZQ7vIDTkY&gclid=CjwKCAiA6aW6BhBqEiwA6KzDc89GSkM6RtQ5hOlelNtC4yPwZoSKdBnG-g8TisnuMOz9cCjEcLVYahoCWVMQAvD_BwE

Does anyone know who owns that light pink 29" Inbred? It's in one of the current project threads but I can't find it...

Thishttps://www.lfgss.com/conversations/366006/ one...?

That's it, thanks!!!!

Xposting Let’s talk cassettes.
Shimano ML5100 vs M7000 worth spending the extra? Why? I need 4 so the collective difference is quite noticeable.
Also a good cheap 11 speed chain, again I need 4 so the collective difference is quite a bit. Ta x

Do we trust this old Cannondale dropout design? It's always seemed mad to me.

1 Attachment

For value chains, I think the decathlon own brand ones are made by KMC, so pretty good for £15 or whatever they are going for atm

Yes I trust it. Why would you think it would fail?

Some of them are 30 odd years old at this point. If they were all breaking, we'd have found out by now.

Anybody know what these are . Came across them . At first thought they were earphones as they are exact right size , but no opening for sound and they have double sided sticky on them .

2 Attachments

Contact mic?

If they were all breaking, we'd have found out by now.

The ones which broke and gave Crack'n'fail their nickname aren't around any more. While the design is obviously dodgy, any which have survived are probably free of what was most likely a sporadic rather than systemic issue. Just from looking at them, they seem like a design which would be very vulnerable to stress raisers at weld imperfections.

Ta, I’ll take a look.

Haven't bought one in a while but they used to be x11.

I’ve always hated it. It’s full sticky-out single cantilever vs aluminium fatigue why didn’t they just stick the stay a bit further back madness.

I was about to say if it had been a problem we’d probably see it posted all over the internet but Tester makes a good point about them back in the day.

Has anyone got a 48mm 12 notch BB tool?

I do
In Haringey if you want to borrow, should be around on Saturday

Hmm could be . Not sure how I would test that but sounds reasonable .