You are reading a single comment by @ketsbaia and its replies. Click here to read the full conversation.
  • I’ve got a Motta 54mm tamper - not the tightest of tolerances but miles better than the tamper that came with my machine. Would recommend.

  • Cheers. I'll check them out. I binned the one that came with the machine ages ago, but the one I replaced it with appears to be a little on the small side.

  • the one I replaced it with appears to be a little on the small side

    That’s quite common. It might not be the tamper which is too small, often the basket is bigger than it says it is. There might be an oversize tamper available for your model. For example, you can get 58.4mm tampers which are a better fit in Gaggia 58mm baskets.

  • @ketsbaia
    Yep - this ^^ one fits even more snugly than the one that came with the machine. Works a charm. Thanks again exteroceptive

About

Avatar for ketsbaia @ketsbaia started