You are reading a single comment by @Bernhard and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Bernhard
I love the pedal hooks. The BB width and Q factor (and maybe pedal type) will determine how far out it falls from the wall. So you'd have a mtb on the bottom and a track bike at the top I guess... But that would only matter if they were really tight together.
You will get a lot of tyre marks on the wall, so either mitigate for that or repaint when you leave. Lots of people opt for strips of wood. Depending how hot the store room gets I think you could buy some decent 3m double sided tape and stick a thin wood batten on the wall. The hook takes the weight the tyre support just stops rotation so it doesn't need to be super strong. Then you should be able to hair drier it off when you leave.