You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
I could of course mask the head tube interface, and inner surface of the cup so to only attack the outer surface of the cups that don't touch anything else than air...?
Grease would theoretically work right?Masking solves your erosion problem, grease doesn't solve your masking problem. Sodium hydroxide turns grease into soap. Powder coat masking tape should work, you might get some bleed at the edges but not enough to affect the fit.
gbj_tester-
Thank you very much!:)
#gottestered
Rodolfo
I could of course mask the head tube interface, and inner surface of the cup so to only attack the outer surface of the cups that don't touch anything else than air...?
Grease would theoretically work right?
I've developed a working method with caustic soda of using thick drain cleaner fluid so higher viscosity, enhanced by the small pellets of caustic soda leading to even higher viscosity and potency.
Please shoot me down if still stupid. Although you generally don't need encouragement for that..;)