You are reading a single comment by @dubkev and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@dubkev
Little update. I was able to get three of the four out with an allen key and a long metal cylinder rod I have, my old friend Archimedes never fails to help. The bolts did not like being taken out of the expanding casings but they came eventually.
However, and I only remember this now from when the neighbour had a go with the drill - the hex slot on the fourth one is rounded out a bit. Using a long crowbar I have managed to pry the entire thing up out of the ground about an inch maybe. But it is not coming out any further than where it is now.
Next I am going to put a metal cutting blade on the reciprocating saw that I have and go through the bolt and casing that I can see between the anchor and the ground. If I lose a finger or an eye I'll invoice LFGSS.
2 Attachments