You are reading a single comment by @moog and its replies.
Click here to read the full conversation.
-
I had to source a similar P shaped profile to remake the skirting for here (added on top of 1x6 pine boards). I got it from B&Q of all places. Might be smaller than what you have but worth a wander round if there's one close. Or Wickes. It will be softwood though.
-
Definitely nothing in builders depot?
-
Can't you router it to that shape using a 10mm radius bead router bit. then cut the straight edge down to size with a jigsaw =and tidy up with a chisel.
stevo_com
hugo7
user6927
@moog
Any suggestions for a supplier for stripwood and mouldings in South East London / Kent? Champion Timber as recommended a few posts up don't seem to have the size I need.
I don't think this shape exists premade so I'll need to glue together a rectangle section (28mm x 9mm) and a half dowel (20mm x 10mm).
I feel like I should use hardwood (sapele?) for durability but I'd probably settle for pine if it was significantly more convenient to source.
1 Attachment