You are reading a single comment by @Ifonlyiwerebelgian and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Ifonlyiwerebelgian
CollinsCycleWorks
This is everything I can remember.
Traxxas Trx4 Kit Version (Comes with 2 speed gearbox and remote locking differentials and you get the fun of building it from scratch)
Carisma SCA-1E XL Pajero Body Shell (very cut down to clear the wheels and approach angles)
Fastrax Aluminium Motor Mount
Traxxas 9t Pinion gear (to drop the speed down)
Traxxas Diff Spools (to permanently lock both diffs)
Hobbywing Quinrun Fusion 1800kv Motor (Turns so bloody slowly it's ridiculous, also has the esc built in, waterproof with a 7.4v BEC output.)
Custom led light bars (super bright, run off the receiver and modified to work with the remote switch that used to lock the diffs)
SRT W45 Waterproof steering servo (standard traxxas servo is about 9kg of torque, this is 45kg and can run at 8.4v)
Jumper cable to run servo direct from the battery.
Yeah Racing Low Centre Gravity Battery Plate.
Injora Deep Dish steel bead lock rims (these also have 60g of weights glued in the front wheels)
Injora Underdrive gears 10/35t (dropping the speed down even more, I may overdrive the front to help with climbing soon)
Injora Dual Stage Foams
And then Brassssss lots of brass.
Injora Front bumper with servo mount (moves weight forward and down lower)
Injora suspension chassis links.
Injora Outer and Inner portal housings.
Injora C knuckles.
Injora 12mm Hex extenders (wider track)
With all the brass, roughly it's added around 1kg over the front axle which really helps it climb steep ground without looping out.