For Sale: Brother R725 Complete - 60cm

Just posting this here to get the feelers out on if this might be of interest to anyone..

This formerly belonged to @Velocio and was the infamous white and gold build until I snagged it and took away all the fun bling.

It was professionally repainted by the guys at @QuinntessentialColours and the photos of the finish don't do it justice. The decals on the seat and head tube are painted in a dark grey under the lacquer, and are nice and subtle.

Pics here are slightly different to the current specs. The cockpit and post/saddle setup is different, however I have plenty of bits that can be swapped in and out to suit. Will take more pics hopefully this weekend with a more up to date build.
Specs wise now it has the following:

Brother 60cm track frame in 725 Reynolds - Blurple Flip Paint Sparkle with Painted decals.
DT Swiss T1800 Wheels
Sugino SG75 Bottom Bracket
Sugino SG75 Silver Crankset (175mm)
Sugino SG75 Chainring (50t Black, can swap for alternatives here on request)
Izumi Standard Track Chain - Black
19t Cog (purple - not sure on the brand).
Nitto S92 Seatpost (black pictured but currently fitted with silver)
Fizik Aliante saddle (not pictured)
Shimano Dura-Ace Headset 7410
Nitto NTC Technomic Stem (silver, not pictured)
Nitto B809aa Risers (silver, not pictured)

Frame measurements:
Top tube 57cm
Seat tube 60cm
Reach 42cm
Wheelbase 98cm
Chainstay 39cm
Front centre 59cm
BB drop 5.5cm
BB height 29cm

Drilled for a front brake, not a rear. With a max clearance of 28mm.

Bike is beautiful, super light, and has been ridden less than 50 miles. I finished the project and immediately found a replacement track frame more suitably sized.

Built up by the guys are SeaBass, it's ready to go.

Looking to get £1000, but understand there's not many people this will fit, who will want something complete and to this spec. Let me know if I'm way off or if you have any questions, cheers.
(located South East, working in Soho)

2 Attachments

This is lovely, have a free bump. If it were a little closer and cheaper I'd be more tempted so glad it's not as I really don't need it!

Going to be splitting this up and reposting, with a bunch of other parts available. Cranks being used in a different project. Thanks.