You are reading a single comment by @moocher and its replies. Click here to read the full conversation.
  • Made some workshop stool tops out of 18mm ply, need to put something on to protect them.

    Thinking about this, but any other/better suggestions?


    1 Attachment

    • Screenshot_20240904-142708.png
  • I was hoping that spray would be a colour as it'll wear off really nicely.
    I'm on the side of anything would do but I used osmo on the last bit of rough old ply, bit of a pain for drying time and recoating, 3 is adequate (even with the fast dry stuff) and is available in small quantities 125ml (can be tinted but your not interested in that) - id say a long way down the line do use the same product to re-do it

About

Avatar for moocher @moocher started