You are reading a single comment by @Airhead and its replies.
Click here to read the full conversation.
-
A cabinet scraper for the flat parts. You need to learn how to prepare the blade but it's doable with a vice, file and a hardened screwdriver. You could get a curvy one to try on the mouldings but that's going to be tricky.
It doesn't look like it needs much scraping if you could get a primer to stick to it that might be the way to go.
Airhead
want to strip this back to a wood finish. Sanding is very slow going and almost useless on the beading. Any suggestions for a chemical stripper? I'm not sure if it's lacquer or varnish or wax. Leaning towards lacquer. Certainly gums up sanding discs well enough.