• These framesets were made by Dedacciai but stickered up by a few UK bike shops - this one is from Graham Weigh. It’s alloy with a very early-noughties carbon wishbone. Fork is generic carbon with alloy steerer. Geometry is quite aggressive, with a steep head tube angle and fairly short wheelbase making it feel a bit taller than usual for the size below (I ride 49/50cm frames at 5’5” and this always felt bigger than other bikes)

    Details:

    Seat tube 49cm ctc
    Top tube 52cm ctc
    67mm of steerer above headset- star nut is installed quite high so would need trimming and knocking down if you wanted to slam it.
    BSA BB (shell recently refaced to get rid of slight BB creak), 27.2mm post, takes band-on 31.8mm front mech.
    Token integrated headset and top cap included.
    Will clear 25mm tyres - lots of space at the front but quite snug at the back due to the shape of the wishbone.
    All external cables, but with nice Brian Rourke-style cable guides on head tube to avoid paint rub.

    Orange paint still in pretty good shape, minus a couple of paint chips on the top tube, marks around the rear dropout, and marks from the FD clamp.

    sold


    6 Attachments

    • IMG_2430.jpeg
    • IMG_2427.jpeg
    • IMG_2428.jpeg
    • IMG_2433.jpeg
    • IMG_2440.jpeg
    • IMG_2437.jpeg
  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Graham Weigh (Dedacciai) alloy road/crit frameset with carbon wishbone, 49cm

Posted by Avatar for 53-39wasmynumber @53-39wasmynumber

Actions