-
unfortunately no the frames are rough in places despite being stripped, plan is to paint the release agent on the frame and try and gauge the correct amount of silicone for the gap and then close the window wiping off any silicone that spills over the lip of the frame with a tool or wet finger.
bit difficult to explain without seeing the frames, they centre tilt so the gaps get bigger the further away from the hinge.looked into getting the frames straightened but that involves their removal, fitting ply in their place, then back at the factory having glass removed and through heat/percussive persuasion straightening them but without having the outer frames to check they fit. then glass refitted.
the cost was nuts as was the experts doing what i’m about to do!
You are reading a single comment by @Mr_Smyth and its replies.
Click here to read the full conversation.
Mr_Smyth
If the frame is smooth and flat you’ll be able to get a prefect edge & wipe off the excess from the frame using silicone tools